AISI 316L 1" Stainless Steel Sanitary Pneumatic Operated Diaphragm Valve Tri Clamp Ends
SPEZILLA OFFERS Sanitary Fittings, Stainless Steel Fittings, Sanitary Valves, Sanitary Tubes, Stainless Clamp, Hygienic Fittings, Hygienic Valves include ferrules, clamps, sanitary clamps, tri clamps, tri clover clamps, hose clamp, pipe hangers, unions, elbow, bends, tee, cross, tube cap, reducer, ball valves, check valves, butterfly valves, sight glass, actuators, plug valves, divert valves, tank valves, filling valves, relief valves, sample valves, sample cock valves, upper valves, level valves, test valves, diaphragm valves, flanges, weld nut, pipe unions, gaskets, weld tube, clamp tube, weld fittings, clamp fittings, tube fittings, tri clamp fittings, ASME BPE tubes, ASME BPE Fittings, UltraPure Fittings and Biopharmaceutical Fittings. All meet the exacting demands for safety, reliability, efficiency and hygiene for standard duty in the food, dairy, beverage, brewing, cosmetic, biotechnology, pharmaceutical, and personal care industries.
1/2"4" (DN 15100)
316L Stainless Steel Bar Stock ASME SA-479
(UNS S31603), 1/2"4" (DN 15100)
The tank interface surface is designed for a weld attachment. However, ANSI flanges can be ordered upon special request.
Drain Port End Connections:
Standard outlet port is on a 30 angle. 45 angle is available upon special request.
The diaphragm provides the body seal as well as the seat seal. There are no paths to the outside environment and as such the valve is suitable for aseptic processes.
As the valve is closed a pressure pad which supports the diaphragm moves towards the sealing face on the body. As the pressure plate moves the diaphragm flexes and is forces down onto the seal area in the centre of the body thus closing off the flow path through the body.
The inter-relationship of body to the pressure plate prevents over compression of the diaphragm. The valve can be actuated either manually or pneumatically are controlled by control tops and solenoid valves.
The seal materials comply with FDA177.2600 standard. Using proprietary technology, the diaphragm uses a combination of EPDM and PTFE, which is secured using SS bolts. The sealing part where contact with the medium is of PTFE material, it has good cold resistance -13F (-25C), excellent heat-resistance 482F (+250C), tolerance to most chemicals, and excellent abrasion resistance to medium flow.
Diaphragm valves, ,manually or pneumatically operated, are specially designed to use on hygienic and aseptic processes in the pharmaceutical industries, The valves is excellent for flow control as well as for on/off duties. Diaphragm valves are widely applied to CIP/SIP.
Working temperature: -10 to +120
Parts in contact with the handling material: SS316L,
Other stainless steel parts: SS304
- - - -
Drive Model: | Manual type plastic turning knob |
Size: | DN25 ~ 50 or other size on request |
Steel Material: | 316L, hygienic design |
Diaphragm Material: | EPDM or EPDM + PTFE |
Max. Working Pressure: | 6 ~ 10 bar |
Working Temperature: | 90 C ~ 150C |
Connection End | Tri Clamp |
Surface Treatment: | Rg 0.4 ~ 0.6m or electrolysis process |
Clamp Standards: | SMS 3017, DIN 11864, DIN 11853, DIN32676, BS 4825, ISO 2852 |
Application: | Pharmaceutical, WFI, Fine Chemical industries |
- - - -
- - - -
Steel Material | Product wetted steel parts | AISI 316L | Provided with material inspection report |
Other steel parts | AISI 304 |
Seal Material | Standard | EPDM+PTFE | All seal materials comply with FDA 21CFR177.2600 |
Option | EPDM, FPM, Silicone, |
Pressure | Working Pressure | 0-145psi (0-10bar) |
Supply pressure for air actuator | Min.- Max.: 5~8bar (70-116 PSI) |
Temperature | Working temperature | -4 F to 302 F (-20C to 150C) |
Surface Treatment | Inside surface treatment | Ra 16-32 in (0.4-0.8 m) |
Outside surface treatment | Sand blast or mirror |
Connection | End connections: Sanitary Clamp, Flanged, or others upon request |
- - - -