ZL180-75 Recycling PE PP Film Granulator Machine Plastic Pelletizing Machine
Characteristic of single screw extruder
1. High precision gear box with ability of over loading, smooth transmitting, lower noise
2. Newly designed barrel and screw to ensure well-distributed of material in melting, low melt temperature and high production
3. The screw is made with standard and high precision during process. After treated by gases and nitride the barrel, it possesses strong wear- and corrosion- resisting. For special material, double metals are available for barrel etc.
4. The barrels cooled by lower with super mute working status, less maintenance
5. PID temperature is controlled by Japan temperature control meter with stable and accurate temperature.
6. Two type of die head design: manual and hydraulic type for easy changing and time saving.
7. ABB or other famous brand Inverter speed control for more stable and good performance of machine and easier operation
Working for plastic raw material dye, recycling plastic pellets from film, flake, scrap and engineering plastics, such as ABS, PC, POM, PP, PE, ABS/PC, PET
Main technical parameter of ZL180-75B
1. YD-180 main machine parameter:
a. The screw 180mm,
b. The screw material: 38CrMoALA, nitrogen hardening. The hardness of the surface is HV950-1050, deep layer: 0.5-0.7 mm,
c. The barrel material: 38CrMoALA, nitrogen hardening. , the hardness of the surface is HV950- 1050; deep layer: 0.5-0.7 mm;
d. Screw centre high 900mm by involute spline connecting with gearbox and screw,
e. Screw length: ~5040mmBarrel heating: cast- Aluminum heater. Heating power: 60kw, divided to 9 zones, controlled separately, has
one heating zone on the machine head, total heating zone are 10 zones; Cooling by fans. Heating capacity: 0-500
f. Main machine gear box mode type is 315. I=16, with high torque, and hard gear face, using SKF imported bearing, material of the
gear axial is 20CrNiMo, by immerse carbon and heating treated, HRC60-63;
g. Motor power: AC motor 132 KW, transmitting by belt, with inverter of Yolico, screw speed: 0-58rpm.
2. SJSL75B submachine.
a.Screw diameter: 71mm, Barrel diameter: 71.8mm.
b.Length-diameter ratio of the main machine: 36: 1 (L/D=36)The screw elements are connected to the core axle through involute spline.
c.The main motor adopts AC motor with a power at 132KW, Yolico brand inverter to adjust the speed. Screw Output Speed 0~500rpm.
d.The screw elements material is W6Mo5Cr4V2(6542)high speed tool steel that had been treated by the vacuum hardening process
with the hardness of the surface is HRC58~62.
e.The kneading screw elements material is W6Mo5Cr4V2(6542)high speed tool steel that
had been treated by the vacuum hardening process with the hardness of the surface is HRC58~62.
f.The matrix of the barrel is made of 45forged steel with the abrasion-resistant alloy 101 (Ni-Fe-Cr-W) inside that smooth and abrasion resistant. The hardness is HRC60-64.
g.The mandrel is made of high quality 40CrNiMo that with high tenacity and durability. It had been treated by the hardening and tempering process. The hardness is HRC28~32.
World famous brand of electronic components
1). Temperature control meter is Japanese RKC meter, intelligent type, double channel;
2). The inverter of extruder is Japanese joint venture ABB
3). The low-voltage apparatus and the button adopt SCHNEIDER product;
4). AC contactor adopt SIEMENS product;
5). The main motor is SIEMENS BEIDE;
6). The air switch adopts CHINT products. The solid-state relays are from American joint venture brand;
7). The electromagnetic valve adopt Denmark DANFOSS product.
Main Technical Details of Two Stage Plastic Pelletizing Machine
- - - -
Model type | Screw Diameter (mm) | Screw L/D | screw speed n(r/min) | Main motor power(Kw) | Typical production capacity (kg/h) |
ZL51-100 | SJSL51 | 50.5 | 20-48 | 500-600 | 37/45 | 150-300 |
YD100 | 100 | 7-15 | 65-85 | 37 |
ZL60-120 | SJSL60 | 59.5 | 20-44 | 400 | 37/45 | 200-350 |
YD120 | 120 | 7-15 | 65-90 | 37 |
ZL65-150 | SJSL65 | 62.4 | 20-48 | 400-600 | 55/75 | 250-450 |
YD150 | 150 | 7-15 | 65-85 | 37/45 |
ZL75-180 | SJSL75 | 71 | 20-44 | 400-600 | 75/90 | 400-650 |
YD180 | 180 | 7-15 | 65-90 | 45/55 |
ZL95-200 | SJSL95 | 94 | 20-44 | 400-600 | 220/280 | 700-15000 |
YD200 | 200 | 7-15 | 65-85 | 75/90 |
- - - -
Photo of ZL180-75 Recycling PE PP Film Granulator Machine Plastic Pelletizing Machine
Nanjing Yongjie Qixin Machinery Equipment Co.,LtdFounded in 2001, covers an area of 20,000 square meters on our own land, with monthly output of machine 20sets. Our factory is certificated to CE, ISO9001:2008.
The company concentrates on research, development and production of high level, accurate, highly sophisticated series product parallel co-rotating cordwood twin screw extruder, single screw extruder, two stage extruders and automatic plastic pelletizing machines. We have provided customers first-class products with strong torque, high production, energy conservation and environmental protection products. The special designed screw structure has realized successfully for one step shaping on many kinds of products, and is widely used in aluminum composite plate, XPS foaming plate, WP plate, PP, PE sheet industry, etc.
QAULITY IS PUT AT THE FIRST , and our factory is certificated to ISO 9001:2008 and CE.