Description Precast Concrete Magnet is a new magnetic assembly which is used to fix the formwork in precast industry. The assembly consists of some strong neodymium magnets and steel plates which form to certain designed magnetic circuit. This magnetic circuit provides very much strong adhesive force to any ferrous workpiece. We develop the push ON/OFF button to open or close the magnetic power outside of the box. SAIXIN® SX-2100 magnet box Vertical pulled off force ≥2100 kgs,external dimension32X12X6CM,N.W.7.6KGS,suitable for produce the thickness more than 150 mm solid wall plate . KEY BENEFITS OF SHUTTERING MAGNETS: 1. Reducing the complexity and time of the installation of formwork (up to 70%). 2. Universal use for mass production of concrete products, and piece products of all forms on the same steel table. 3. Eliminates the need for welding, shuttering magnets does not damage the steel table. 4. Makes it possible to produce different shape and size concrete elements. 5.The main advantage of the shuttering magnets is that you do not need to have a lot of different forms for different products, you need to have a set of magnets, adapters for different height boards and steel table.

Description Precast Concrete Magnet is a new magnetic assembly which is used to fix the formwork in precast industry. The assembly consists of some strong neodymium magnets and steel plates which form to certain designed magnetic circuit. This magnetic circuit provides very much strong adhesive force to any ferrous workpiece. We develop the push ON/OFF button to open or close the magnetic power outside of the box. SAIXIN® SX-2100 magnet box Vertical pulled off force ≥2100 kgs,external dimension32X12X6CM,N.W.7.6KGS,suitable for produce the thickness more than 150 mm solid wall plate . KEY BENEFITS OF SHUTTERING MAGNETS: 1. Reducing the complexity and time of the installation of formwork (up to 70%). 2. Universal use for mass production of concrete products, and piece products of all forms on the same steel table. 3. Eliminates the need for welding, shuttering magnets does not damage the steel table. 4. Makes it possible to produce different shape and size concrete elements. 5.The main advantage of the shuttering magnets is that you do not need to have a lot of different forms for different products, you need to have a set of magnets, adapters for different height boards and steel table.

Product Description CQB -FT Series Teflon lining magnetic pump CQB -FT series pump is a horizontal, seal less centrifugal magnetic drive pump, compliant with ISO/ASME/ANSI sealless pump standard for general emission-free services. Operating Range Flow: 7to 120m3/hr; 31 to 528 GPM Head: 22 to 50m; 22 GPM to 164 feet Temperature: -20 °C to +100 °C;-4 to 212 °F Product Feature -Leak-proof design. Seal-less Teflon lined magnetic drive pump, driven by magnetic coupling indirectly, motor shaft and pump chamber is completely sealed, avoid pump leakage problem and use site pollution. - Maintenance convenient and long service life. Cost-intensive wearing parts are canceled by the seal-less method of construction, therefore, reduced maintenance costs and long service life. . Virgin Fluorplastic - Considerably easier and more reliable quality control - No reduction in the permeation resistance. - Pure pharmaceutical and fine chemical media: no contamination With ductile cast iron casing absorbs all the hydraulic and pipework-forces. According to DIN/ISO5199/Europump 1979 standard. Comparing to plastic pumps, no expansion joints are required.Flange with service-minded through holes to DIN;ANSI,BS;JIS. For flushing system and monitoring device as required, the draining nozzle will be offered. The metal-free system does not induce any eddy currents and thus avoids unnecessary heat generation. Spacer sleeve made of Carbon-fiber-reinforced plastic [CFRP], Efficiency and operational reliability benefit from this .Even low flow rates or media near their boiling point can therefore be conveyed without the introduction of heat. Close Impeller -Closed impeller with flow-optimized vane channels: for high efficiency and low NPSH values. The metal core is protected by a thick-walled seamless plastic lining, the large metal core and increase the mechanical strength considerably even at elevated temperature and high flow rates .Secured screw connection to the shaft to against loosening if the pump is started up in the wrong direction of rotation or in the case of back-flowing media Product Specification / Models CQB50-32-160FT Flow Capacity : 12.5 m3/h Pump Head: 32 m Pump Motor Power: 4kw (5.5HP) Application / Models Application Corrosive, pure and contaminated media in the chemical, pharmaceutics and petrochemical industries, in metal processing, waste water treatment etc. . When Stainless steel is not sufficiently resistant . Alternatively to expensive Haste alloy, titanium alloy Pumps . When anti-adhesive surfaces are important. Pumping Liquid 1.Acid and caustic liquid 2.Oxidizer corrosive liquids 3.Difficult-to-seal liquids 4.Sulfuric acid 5.Hydroelectric acid 6.nitric acid 7.Acid and lye

CQB -F Series Magnetic Driven Pump Operating Temperature:-20oC ~ 120 oC Flow:3m3/h ~ 200 m3/h Pump lift:15m ~ 80m Product Overview:It is the application of modern magnetic theory which use of permanent magnets to achieve non-contact indirect transmission of a chemical process pump . When the external rotor motor drive (that is, outside the magnet) assembly rotates through the magnetic field through the magnetic line of force within the rotor drive isolation kit (that is, inside the magnet) synchronous rotating assembly and the impeller, closed in the static dielectric isolation kit so that no leakage of the purpose of pumping medium,Solve the mechanical transmission pump seal leakage, is sealed, no leaks, a new type of non-polluting industrial pumps. CQB Series magnetic chemical process pump is to prevent running, run, drip, drain phenomenon, the elimination of environmental pollution, and create "no-leak Workshop", "no leak factory", the realization of security, the ideal of civilized Production pump. Application Field : This product is widely used in petrochemical, acid alkali, non-ferrous metal smelting, automotive manufacturing process of pickling, rare earth separation, pesticides, dyes, medicine, paper-making, electroplating, radio and other industries. Technical Note CQB Series Pump Min Flow : 0.8m3/hour (2900r/min) ; Max Flow: 100 m3/hour(2900r/min) ; Pipeline pressure to allow inhalation of 0.3MPa. Pump maximum pressure 1.6Mpa Pump Materials: 1.Pump Body :Cast Iron (HT200 / HT250 ) 2.Flow Component: FEP (F46) 3. Mechanical Seal : sealless instead of magnet set 4.Bearing : Stainless Steel 5.Alex Sleeve: Stainless Steel 6.Coupling : Cast Iron 7.Motor : WNM Motor or other China Motor brand Model and technical data CQB 65-50-160F CQB Magnetic drive 65 Inlet diameter is 65mm 50 Outlet diameter is 50mm 160 Impeller diameter is 160mm F lining Fluorine Plastic Product Feature Thermal Plastic Centrifugal Pump Teflon of FEP .PFA. PTFE. Strongly Magnetic Performance Use Ndfeb magnet With SIC stationary seal ring Special produced Impeller with SIC Insert Materials. Product Specification / Models CQB65-50-160FA Flow Capacity :25 m3/h Pump Head :32m Power: 7.5kw Application / Models Application Corrosive, pure and contaminated media in the chemical, pharmaceutics and petrochemical industries, in metal processing, waste water treatment etc. . When Stainless steel is not sufficiently resistant . Alternatively to expensive Haste alloy, titanium alloy Pumps . When anti-adhesive surfaces are important. Pumping Liquid 1.Acid and caustic liquid 2.Oxidizer corrosive liquids 3.Difficult-to-seal liquids 4.Sulfuric acid 5.Hydroelectric acid 6.nitric acid 7.Acid and lye 8.nitromuriatic acid

IHF series End-Suction Centrifugal pump is a horizontal type , non-metallic chemical centrifugal pump, compliant with ISO ISO2858, DIN EN 22858. Operating range Flow: up to 400 m3/h, max 1761 GPM Head: 80m;410 feet Temperature ratings from - 20 °C to +150 °C;-68°F to+302°F The material is virgin, unfilled lining FEP, Therefore:(1)Considerably easier and more reliable quality control.(2)No reduction in the permeation resistance.(3) Pure pharmaceutical and fine chemical media: no contamination -Robust pump casing Pump casing and cover are made of HT200 iron lining with PFA, PTFE, impeller made by WCB wrapped by PTFA, PTFE, which grantee this type centrifugal pump could widely used in corrosive application and wear well. With ductile cast iron armouring absorbs all the hydraulic and pipeworkforces to DIN/ISO5199/Europump 1979.In contrast to partially or non-armoured plastic pumps, no expansion joints are required. Flange with service-minded through holes to DIN;ANSI,BS;JIS. For flushing system and monitoring device as required, the draining nozzle will be offered(pump housing picture) -Reliable mechanical seal Shaft seal is outside seal, stationary seal is alumina ceramic ( 99.9%), rotating seal is PTFE filling material or according to customer request. Pumping Liquids acid, alkali salt solution, Strong oxidant, organic solvents, corrosive slurries, solvents, Hydrocarbons and other strong corrosive medium. ammonia water ion film caustic soda Waste water Applilcation Acid pickling process, Painting process Textile industry, etc Pharmacy and Health Electroplating industry Chlorine water and waste water treatment, Petroleum Industry Chemical Industry Adding acid process. Pump Parameter" IHF32 -25-125F Q: 3.6 m3/h H: 20 m P:2.2KW Motor parameter: 3phase 380V 50Hz, 2900rpm. if you need any pump, please let us to know it.

Chemical Name: Polymerized-2,2,4-trimethyl-1,2-dihydroquinoline resin Synonyms: RD, TlectolTMQ,Vulkanox HS, Accinox TQ Molecular Formula: (C12H15N)n. n=3-4 Molecular Weight:173.25 CAS NO.: 26780-96-1 EINECS NO.: 500-051-3 Specification: Appearance Amber to brown granular Softening point oC 80.0-100.0 heating loss %≤ 0.30 Ash%≤ 0.30 Application: TMQ is a very important category rubber antioxidant. It has a good protective effect for heat, oxygen and fatigue aging, and stronger inhibitory effect for metal catalytic oxidation, no spray cream phenomenon, widely used in the manufacture of tyres, motorcycles births, bicycles births, rubber,plastic,adhesive tape, wires, cables and other rubber products. Package: 25kg in kraft paper bag with PE bag.

Chemical Name:Zinc 2-mercaptobenzothiazole Molecular Formula:C14H8N2S4Zn Molecular weight: 397.88 CAS NO:155-04-4 EINECS NO.: 205-840-3 Specification: Item MZ(low M+) MZ(high M+) Powder Oiled powder Granule Powder Oiled powder Granule Appearance Light yellow powder (Granule) Light yellow powder (Granule) Initial M.P. oC≥ 200.0 200.0 200.0 200.0 200.0 200.0 heating loss %≤ 0.40 0.40 0.40 0.40 0.40 0.40 Zinc content % 20.0-25.0 20.0-25.0 20.0-25.0 15.0-18.0 15.0-18.0 15.0-18.0 Free M % 0.0-2.0 0.0-2.0 0.0-2.0 14.0-18.0 14.0-18.0 14.0-18.0 Residues on sieve(150μm), % ≤ 0.10 0.10 \ 0.10 0.10 \ Residues on sieve(63μm), % ≤ 0.40 0.40 \ 0.40 0.40 \ Oil content, % \ 1.0-2.0 \ \ 1.0-2.0 \ Granule diameter, mm \ \ 1.5-2.5 \ \ 1.5-2.5 Properties:Light yellow powder (granule) with a little bitter, no poison. The density is 1.70(20oC), the decomposable temperature is 300oC. Soluble in chloroform, acetone, partly soluble in benzene, ethanol, CCl4, insoluble in gasoline, water and ethyl acetate. Decomposion when meeting strong acid and strong alkali. Application:ZMBT is mainly used together with ZDMC and ZDEC as primary accelerator for latex; can achieve higher modulus of valcanized latex. In addition, it can achieve good compressive deformation resistance without additional curing time. ZMBT will not affect the stability of latex. Packing:25kg in kraft paper bag with PE bag inside. Storage:The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years .

Chemical Name:Zinc dibutyl dithiocarbamate Molecular Formula:C18H36N2S4Zn Molecular Weight: 474.14 CAS NO:136-23-2 EINECS NO.: 205-232-8 Specification: Item Powder Oiled powder Granule Appearance (visual inspection) white powder(Granule) Initial M.P. oC≥ 104.0 103.0 103.0 heating loss %≤ 0.40 0.40 0.40 Zinc content % 13.8-14.8 13.5-14.5 13.5-14.5 Residues on sieve(150μm), % ≤ 0.10 0.10 \ Residues on sieve(63μm), % ≤ 0.50 0.50 \ Oil content, % \ 1.0-2.0 \ Granule diameter, mm \ \ 1.5-2.5 Properties:White powder (granule). The density is 1.24. Soluble in CS2. benzene, chloroform, alcohol, diethyl ether, insoluble in water and low concentration alkali. Good storage stability . Application:ZDBC is used as primary or secondary accelerator for NR, SBR, IIR or EPDM; also used for natural rubbers or synthetic latex; as anti-oxidant for rubber-based adhesives. Packing:25kg in kraft paper bag with PE bag inside. Storage:The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.

Chemical Name:Zinc diethyl dithiocarbamate Molecular Formula:C10H20N2S4Zn Molecular Weight: 361.93 CAS NO:14324-55-1 EINECS NO.: 238-270-9 Specification: Item Powder Oiled powder Granule Appearance (visual inspection) white powder(Granule) Initial M.P. oC≥ 174.0 174.0 174.0 heating loss %≤ 0.40 0.40 0.40 Zinc content % 17.5-19.0 17.2-18.7 17.2-18.7 Residues on sieve(150μm), % ≤ 0.10 0.10 \ Residues on sieve(63μm), % ≤ 0.50 0.50 \ Oil content, % \ 1.0-2.0 \ Granule diameter, mm \ \ 1.5-2.5 Properties:White powder (granule). Density is 1.41. Soluble in 1% NaOH solution, CS2, benzene, chloroform, slightly soluble in alcohol, insoluble in gasoline. Application:ZDEC is used as primary or secondary accelerator for NR, SBR, IIR or EPDM; also used for natural rubbers or synthetic latex; as anti-oxidant for rubber-based adhesives. Packing:25kg in kraft paper bag with PE bag inside. Storage:The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.

Chemical Name:Tetramethyl thiuram disulfide Molecular Formula:C6H12N2S4 Molecular Weight: 240.43 CAS NO:137-26-8 EINECS NO.: 205-286-2 Specification: Appearance white powder Initial M.P. oC≥ 142.0 heating loss %≤ 0.40 Ash%≤ 0.30 Residues on sieve(150μm), % ≤ 0.10 Properties:White powder (granule). The density is 1.29. Soluble in benzene, acetone, chloroform, CS2 partly soluble in alcohol, diethyl ether, CCI4 insoluble in water, gasoline and alkali with lower concentration. Meeting hot water becomes to dimethyl ammonium and CS2. Be sensitive to skin and peogaster. Application:Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good heat aging and compression set resistance in sulphurless and EV cure systems Good color retention is obtained in non-black vulcanisation. A valuable secondary accelerator for EPDM. May be used as a retarder in the vulcanisation of chloroprene rubber. Packing:25kg in kraft paper bag with PE bag inside. Storage:The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years. Notes: the products could be oil coated powder,granular as per customer’s request.

Chemical Name:Diphenyl guanidine Molecular Formula:C13H13N3 Molecular Weight: 211.26 CAS NO:102-06-7 EINECS NO.: 203-002-01 Specification: Appearance Gray-white powder Initial M.P. oC≥ 144.0 heating loss %≤ 0.40 Ash%≤ 0.40 Residues on sieve(150μm), % ≤ 0.10 Properties:Grayish-white powder. No taste, no poison. Densiy is 1.08-1.19. Soluble in acetone, ethyl acetate, benzene, alcohol, slightly soluble in CCl4; Insoluble in water and gasoline. Application:Used as a secondary accelerator with thiazoles and sulphenamides in NR and SBR compounds. Exhibits better storage stability compared to thiuram and dithiocarbamates but is not so active. DPG can be used in latex as secondary gelling agent (foam stabilizer) in the silico-flouride foam process. Packing:25kg in kraft paper bag with PE bag inside. Storage:Keep in a cool, well-ventilated place. The validity is 2 years. Notes: the products could be oil coated powder, as per customer’s request.

Chemical Name:N-Cyclohexyl-2-benzothiazole sulfenamide Molecular Formula:C13H16N2S2 Molecular Weight: 264.41 CAS NO:95-33-0 EINECS NO.: 202-411-2 Specification: Appearance Gray-white powder Gray -white granular Initial M.P. oC≥ 98.0 98.0 heating loss %≤ 0.30 0.30 Ash%≤ 0.30 0.30 Residues on sieve(150μm), % ≤ 0.10 \ Properties:Gray-white powder (granule) with a little odor, no poison. The density is 1.31-1.34. M.P.: 98oC above. Soluble in benzene, boluene, chloroform, CS2, CH2Cl2 acetone, ethyl acetate, hardly soluble in alcohol, insoluble in water, gasoline, acid / alkali with lower concentration Application:CBS has excellent scorching property, high curing rate, high modulus of vulcanized rubbers, wide range of application. It is a sulfenamide accelerator with the highest activity in EPDM. Packing:25kg in kraft paper bag with PE bag inside. Storage:Stored in cool, dry and draughty place; avoid direct sunlight; protect against moisture or high temperature. The validity is 2 years.

Chemical Name:Dibenzothiazole disulfide Molecular Formula:C14H8N2S4 Molecular Weight: 332.46 CAS NO:120-78-5 EINECS NO.: 204-424-9 Specification: Appearance Gray-white or light yellow powder Initial M.P. oC≥ 165.0 heating loss %≤ 0.30 Ash%≤ 0.30 Residues on sieve(150μm), % ≤ 0.10 Properties: a little bitter, no poison. The density is 1.45-1.54, m.p.: 166oC. Soluble in chloroform, partly soluble in benzene, ethanol, CCl4, insoluble in gasoline, water and ethyl acetate. Good storage stability. Application:MBTS has medium curing rate in NR and SR; suitable for most general rubbers; Used as plasticizer and delay agent in chloroprene rubber. It is usually used together with secondary accelerator in the synthesis of polymers; has better scorch safety than MBT. Packing:20kg in kraft paper bag with PE bag inside. Storage:The product should be storaged in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years. Notes: the products could be oil coated powder,granular as per customer’s request.

Chemical Name:2-Mercaptobenzothiazole Molecular Formula:C7H5NS2 Molecular Weight: 167.25 CAS NO.: 149-30-4 EINECS NO.: 205-736-8 Specification: Appearance Gray- white or light yellow powder Initial M.P. oC≥ 171.0 heating loss %≤ 0.30 Ash%≤ 0.30 Residues on sieve(150μm), % ≤ 0.10 Properties: Slightly foul odor and bitter taste, nonpoisonous. Specific gravity: 1.46-1.52.Soluble in ethyl acetone, acetone, dilute solution of sodium hydroxide and sodium carbonate, ethyl alcohol. Not easily soluble in benzene. Insoluble in water and gasoline. Application:MBT is fast and nonpolluting accelerator suitable for rubbers and latex; can achieve good cold vulcanization when used together with secondary accelerator TMTD, TETD, DPG; it gives vulcanized rubbers excellent anti-aging property, and is mainly used in the manufacture of tyres,tubes,rubber belts, adhesive tape, rubber shoes,hoses etc; can not be used as food material. Packing:25kg in kraft paper bag with PE bag inside. Storage: keep in a dry , cool, well-ventilated place. The recommended max. storage life is 2 years. Notes: the products could be oil coated powder,granular as per customer’s request.

The Heavy Duty Pump MV is designed for applications requiring high reliability and durability. The bearing assembly allowsheavy duty cast iron submersible pumps to operate under "squeaky" conditions without damaging the bearings, and is designed to treat abrasive slurries and corrosive fluids by using wet end parts of elastomer or metal linings. Wear-resistant pumps are suitable for mining, chemical processing, wastewater treatment, gravel and general process applications. Wear Resistant Sump Pump Range: Discharge Size: 40 to 250 mm Capacity: 17 to 1000m³/h Heads: 4 to 40 m Heavy Duty Sump Pump Typical Application: (1) Mill Discharge (2) Coarse Sand (3) Tailings (4) Mineral Concentration (5) Heavy Media (6) Coal Washing (7) Process Chemical (8) Effluent Handing (9) FGD (10) Wastewater treatment Heavy Duty Sump Pump Features: 1. The MV series vertical metal sump pumps are typically immersed in water at the bottom of the tank for conveying highly abrasive, coarse particles of highly viscous slurry. 2. One of the main features of this vertical metal sump pump is the integral pump casing. The wet end is replaceable and made of high chrome for maximum corrosion resistance. Vertical metal sump pumps are available for different pumping applications. 3.Various types of impellers are designed to handle different pumping tasks. 4. The vertical cantilever design eliminates the need for shaft seals or seal water. 5. The parts immersed in the mud can be made of metal or rubber. Heavy Duty Sump Pump Advantages 1. The physical layout of the submersible Heavy Duty Sump Pump simplifies maintenance operations. 2. The Heavy Duty Sump Pump body is bolted to the support plate. A bearing assembly is mounted on the top of the support plate. Close to the pump end is a double row tapered roller bearing. Connected to the drive end is a single row cylindrical roller bearing. 3. Mounted on the bearing assembly is a motor support or motor mount where the motor is mounted. A flexible coupling or drive belt connects the motor shaft to the pump shaft. 4. In the absence of shaft seals or sealed water, the Heavy Duty Sump Pump can operate normally even if there is not enough mud to reach the suction side. 5. A screen filter is provided on the suction side to separate large particles from the slurry. Hydraulic Modeling The open impeller is designed with blades on both sides to balance the centrifugal force and ensure stable operation. The wide flow path allows large particles and high viscosity slurries to pass. Transmission Grease bearing assembly: Double row tapered roller bearings are closer to the pump shaft end, while single row cylindrical roller bearings are closer to the drive. Installation Types DC: The motor mounting base is set above the bearing assembly, so it is easy to replace or repair the motor parts. BD: A V-belt is used to connect the motor shaft and the vertical heavy duty sump pumps shaft. The motor support frame is installed above the bearing assembly, allowing easy replacement of grooved wheels. The purpose of swapping grooved wheels is to change the rotary speed of the pump shaft in order to suit varying pumping applications or conform to the worn-down sump pump.

The MD dredge pump is horizontal, single-stage, cantilevered structure which is designed to meet the requirement of the contractor demanding and comprehensive dredging requirement. The horizontal froth pumps have excellent wear resistance and high efficiency, easy to maintain and improve the output of the operation. As a dredge pump supplier, we offer the pump with discharge from 200mm to 500mm is single casing, and discharge from 600mm to 1000mm is double casing. Pump Range: Discharge Size: 200 to 1000 mm Capacity: 450 to 27500m³/h Heads: 10 to 75 m Typical Application: (1) Dredging (2) Coarse Sand (3) Oil Sand (4) Sugar (5) Paper & Pulp Features 1. Available with only one impeller, the MD series Heavy duty submersible dredging pumps sucks up slurries containing sand and silt from one suction side. It is in essential a horizontal cantilever dredging Pumps. 2. The single-casing dredging Pumps comes with a discharge outlet that ranges from 300mm to 500mm in diameter, while the double-casing model has a discharge outlet with diameter somewhere between 600mm and 1000mm. 3. Options of shaft seal: packing seal, mechanical seal, a combination of the first two (for single-casing models), and helix L rubber seal (for double-casing pumps). Advantages 1. The physical layout of this dredge pump for mining allows easy installation and use on the dredger. Simplified structure also delivers reliability. 2. For dredging pumps with large-diameter discharge outlets, we utilize a double-casing design that allows the internal liners to be completely worn out before replacement is needed. This design also prevents water from entering even when the liners are broken. 3. Front disassembly allows easy repair and maintenance. 4. The impeller is threaded onto the pump shaft via the 4-starts acme screw thread. This way of joint allows not only transmission of large torque but also easy installation and disassembly. The sleeve O-ring makes it easy for users to dismantle the impeller from the shaft. Hydraulic Modeling 1. A steep-curve pump is desirable for pumping sediments to a wide range of distances. The pump curve describes the relation between flow rate and head. 2. Advanced hydraulic model minimizes head loss, further ensuring high efficiency and low power consumption. 3. Reliable shaft seal allows the dredge pump for mining to be 100% leak-proof. 4. Optimal cavitation performance gives the single-suction dredging pump a great ability to draw up sediments from a deeper depth with higher solids concentration. 5. Specially designed vanes create wide flow passages which allow the dredger to scoop up gravel, sand, or high-plasticity clays continuously without causing clogging. 6. Wet-end parts are made from alloy cast iron of high wear resistance, which ensures the best service life possible.

The high head slurry pump MH is a cantilevered, horizontal, centrifugal slurry pump, which is specifically designed to combat the need to run conventional to generate high heads often required in many modern slurry pumping application single pump unit rather than series pumping can be adopted, at greatly reduced capital cost, while the Wear-Resistant Slurry Pump and High Head still offering optimum wear life and efficiency. High Head Slurry Pump Range: Discharge Size: 1″to 6″ Capacity: 16 to 1125m³/h Heads: 12 to 95m High Head Slurry Pump Typical Application: (1) Mill Discharge (2) Coarse Sand (3) Tailings (4) Mineral Concentration (5) Heavy Media (6) Coal Washing (7) Phosphoric Acid (8) Process Chemical (9) Bottom/Fly Ash (10) Metal Smelting

1 24 years manufacturer 2 2 years warranty 3 CE/ROHS/UL/SGS /EN14960 certificate 4 Our water ball appears in 2012 Olympics 5 size: D5m or As Your Demand 6 material :0.85 mm PVC 7 OEM/ODM : yes 8 Item No.: HS-042# 9 Printing:Hand printing,computer printing or silk printing 10 Workmanship:Sewn with double/quadruple stitches 11 Accessory:Blower with CE/UL certificate ,repair kits 12 Delivery method/time:5-8 working days after receive deposit 13 Package:Carpet inside and PVC bag outside 14 Shipment terms:By sea, by air, by express 15 Payment terms:T/T or L/C, 30% as deposit, balance before shipping 16 MOQ: 1 PC,The more you order,better the price is!

<a href="https://www.yneed.co.uk/human-hair-lace-front-wigs.html">lace front wig</a>